User guide

5-2
IM DR231-11E
5.1 Command Format
Terminator
Any one of the following forms a terminator.
• CR + LF
•LF
• EOI = True
(If EOI is to be used for a terminator, add EOI = True to the last parameter character.)
Sub-delimita
Several commands can be executed in a row when they are divided by a semicolon (;).
Example
XA2, 2, 0.5 ; XV4 ; XI2, AUTO CrLf
Note
• The total data length from the first character to the terminator should not exceed 200 bytes.
•A sub-delimita cannot be used for the commands FM, LF, CF, RF, RC, RS, BL, DS, XE, or XZ. These commands can only
be carried out one by one.
• In case of RS-232-C one ACK-status (E0/E1) will be output for each command devided by ;.