Instruction Manual

9-13

IM DR231-01E

Event/Action Function and Other Functions

Selecting range copying (COPY RANGE)

• ON: Copies the type of input, measuring ranges, recording spans, linear scaling, engineering

units, and tags set.

• OFF: The copying of ranges is disabled.

Selecting alarm copying

• ON: Copies the type of alarm, alarm values, and relay (internal switch) setting.

• OFF: The copying of alarms is disabled.

Selecting copying of other items (COPY OTHER)

• ON: Copies setting recording zones, partial compressions, dot-recording ON/OFF, digital

printing ON/OFF, manual printing ON/OFF, alarm printout ON1/ON2/OFF, scale-value

printout ON1/ON2/ON3/OFF, list-printout ON/OFF, average numbers in moving averages and

interpolation ON/OFF.

• OFF: The copying of other items is disabled.

Setting a copy-source channel

Sets a copy-source channel with up to three characters. For details on these characters, see

Section 4-1, “Using Auto Mode,” on page 4-2.

Setting a destination channel to be copied

Sets a channel to which the setting data in the source channel are copied.

• When the COPY RANGE, COPY ALARM and COPY OTHER are set to ON, individual set

data are copied.

• For the setting of a destination channel number, see Section 5.1, “Setting the Type of Input and

Recording Span,” on page 5-2.

Setting a computation channel to be copied

Copies the following settings.

Range copy ON : Computation equation, unit, tag

Alarm copy ON : Alarm

Other copy ON : Zone, partial, trend ON/OFF, digital print ON/OFF, scale print ON/OFF,

manual print ON/OFF, alarm print ON/OFF, list print ON/OFF, linear

interpolation

9.2 Copying