Instruction Manual

7-3
IM DR231-01E
Executing Recording
7
7.3 Starting Message Printing
D I S P M O D E
P R I N TF U N C
I N S D E L
R A N G E A L A R M
S E TC H A R T E N T E R
F E E D
M. F U N C 1
M. F U N C 2
RECORD
ALARM
CHART
KEYLOCK
R E C O R D
MSG_PRINT
>Select Function item
E S C
• Press the FUNC key to enter the FUNC menu.
• To display the print menu from the RANGE, ALARM, CHART or SET(SET3) menu, press the
DISP key.
• Select / set
using the keys.
• To escape from a lower menu, press the MODE (ESC) key. Its main menu will appear,
although new settings / selections will not be kept.
MSG PRINT
PRINT MESSAGE No.=01
ENTER
ENTER
(Main menu)
(Lower menu)
Starting message printing (MSG PRINT)
• Select a message number from 01 to 20. For details on how to set the message, see Section 6.7,
“Entering Messages, Headers and Titles” on page 6-15.
• While the instrument is recording, if the ENTER key is pressed, messages are printed.
• If an alarm occurs, messages are also printed. See Section 6.5, “Setting the Alarm Printout” on
page 6-11.
Message printout buffer
• Analog trend
Up to 10 message printouts can be stored in memory.
• Information exceeding 10 message printouts will be discarded.
• After one message printout, 9 are stored and another printout message can then be stored.
• If 11 message printouts (exceeding the allowed number of 10) are entered, an asterisk (*)
will be printed at the top of the message when 10 message printouts are executed.
• The message buffer clear function is available for canceling stored printout messages (see
page 9-17).
• Logging mode
Up to 5 message printouts can be stored in memory.
• Information exceeding 5 message printouts will be discarded.
• If 6 message printouts (exceeding the allowed number of 5) are entered, an asterisk (*) will
be printed at the top of the message when 5 message printouts are executed.
• The message buffer clear function is available for canceling stored printout messages (see
page 9-17).