User Manual

IM 12J05D02-01E
Parameter setting 5-23
Code Display Function Function detail X Y Z Default values
Contacts Settings
44 *D.TIME Dead Time Delay after setpoint passed 0- 2.0 s 0.2 s
*P.HYST Hysteresis Process value hysteresis
0-50 mg/l or 0-300 % 0.1 mg/l
*T.HYST Temp hyst Temperature hysteresis
0- 5 °C (0- 12 °F) 0.5 °C
45 *RANGE Prop. control Proportional range 0- 50 mg/l 5.0 mg/l
*PER. Duty cycle Period/ Duty cycle : 5- 100 s 10.0 s
*FREQ. Frequency Frequency control 50 - 120 per min. 70 p.m.
46 *tI.CNT Integral time Int. time for contacts 10 - 1999 s 100 s
47 *EXPIR Time out alarm Disable time out alarm 0 0
Enable time out alarm 1
*tE. mn time out alarm after 0.5 - 199.9 min 15 min
48-49 Not used