Instruction Manual
Table Of Contents
- 1. Introduction
- 2. Safety Precautions
- 3. FOUNDATION FIELDBUS
- 3-1 About Foundation Fieldbus
- 3-2 Getting started
- 3-3 Configuration
- 3-4 In-process operation
- 3-5 Device status
- 3-6 List of parameters for each block of the EXA
- 3-7 Application setting and change of basic parameters
- 3-8 Operation of each parameter in failure mode
- 4. PROFIBUS
- APPENDIX 1. LINK MASTER FUNCTIONS
- Revision Record
- Supplement
IM 12A00A01-61E
Foundation Fieldbus 3-21
3-21
Equations:
FIELD_VAL = 100 [XD_SCALE]
Direct: PV = channel value
Indirect: PV = EU@0% + (EU@100% - EU@0%) [OUT_SCALE]
Ind Sqr Root: PV = EU@0% + (EU@100% - EU@0%) [OUT_SCALE]
√(FIELD_VAL)
100
FIELD_VAL
100
(channel value - EU@0%)
(EU@100% - EU@0%)
Simulate Convert Cutoff Filter
CHANNEL SIMULATE L_TYPE LOW_CUT PV_FTIME
XD_SCALE Output
OUT_SCALE
Mode
Alarms
HI/LO
PV
OUT
FIELD_VAL