Software GA10 User guide

4-11
IM 04L65B01-01EN
• Device Communication Status
The status of communication with the devices in the
Device List is displayed. Nothing is displayed when
data collection is stopped.
Device name
Model name
Communication address
Communication status
Model icon
Item Description
Model icon Device icon
Device name Device name and device number
Model name Model name and release number or software
name and release number
Communication
address
IP address
Communication
status
Communication status between the server
and device
Normal, Error, Retrying
4.8 Controlling Devices during Data
Collection
4.8.1 Controlling Device Computation from
GA10
On the Project menu, click Start Computing, Stop
Computing, Clear Computing, or Clear&Start
Computing.
Computation is collectively controlled on the devices that
meet the following conditions.
• Devices that are in the Device List of the project
• Devices that have computation functionality
• Devices that support Start Computing, Stop
Computing, Clear Computing, and Clear&Start
Computing.
Connected
Device,
Software
Start
Comp.
Stop
Comp.
Clear
Comp.
Clear&Start
Computing
μR10000,
μR20000
Yes Yes No Yes
DX1000,
DX1000N,
DX1000T
Yes Yes Yes Yes
DX2000,
DX2000T
Yes Yes Yes Yes
MV1000,
MV2000
Yes Yes Yes Yes
CX1000,
CX2000
Yes Yes Yes Yes
FX1000 Yes Yes Yes Yes
MX100, MW100 No No No No
DA100, DR130,
DR230,
DR240
Yes Yes Yes Yes
GX10,
GX20,
GP10,
GP20
Yes Yes Yes Yes
DAQLOGGER,
DAQ32Plus,
MXLOGGER
No No No No
Devices
supporting
the Modbus
protocol
No No No No
Yes: Supported No: Not supported
* When connected over an Ethernet network, the user registered
in the device must have privileges to use computation for this
feature to work.
Chapter 4 Monitoring Data Collection