Manualshelf

User Manual

ManualsBrandsYokogawa ManualsSensorsData Acquisition with PID Control CX2000
12345678910
3
IM 04L31A01-05E
1st Edition : September 2003 (YK)
All Rights Reserved, Copyright © 2003 Yokogawa Electric Corporation
This manual explains the functions that have been changed on the CX1000/CX2000 with
firmware version 3.02. If you purchased a CX1000/CX2000 with firmware version 3.02
or later, change the contents of the following manuals with the contents of this manual.
Manuals Provided on the CD-ROM
Manual Title Manual No. Description
CX1000 IM 04L31A01-03E See this manual for the descriptions of the CX1000
User’s Manual operations.
CX2000 IM 04L31A01-01E See this manual for the descriptions of the CX2000
User’s Manual operations.
CX1000/CX2000 IM 04L31A01-17E See this manual for the descriptions of
Communication Interface communication commands.
User’s Manual
DAQSTANDARD IM 04L31A01-61E See this manual for the descriptions of the
User’s Manual DAQSTANDARD operations.
Paper Manuals
Manual Title Manual No. Description
CX1000 Operation Guide IM 04L31A01-04E See this manual for a list of initial values of the
CX1000.
CX2000 Operation Guide IM 04L31A01-02E See this manual for a list of initial values of the
CX2000.
Overview of the Functional Changes
The functions that have been changed with the upgrading of the firmware (version 3.02)
on the CX1000/CX2000 are described below.
Event Output Setting
• Before Version 3.02
Event output is set for each program pattern.
• Version 3.02 and later
The event output setting is independent from the program pattern setting. The event
output setting is applied to all program patterns. The event output can also be set for
each program pattern as before.
Displayed Language
• Before Version 3.02
The selectable languages displayed on the screen are English, Japanese, German,
and French.
• Version 3.02 and later
Chinese is available in addition to the languages listed above.
Procedure for Checking the Firmware Version
1. In the operation mode, press the FUNC key.
2. Press the [Next 1/2] soft key.
3. Press the [Log] soft key.
4. Press the [System] soft key.
As shown below, the system information display shows the firmware version.
Firmware version