User Manual

12 IM 04L31A01-05E

Communication Commands

Communication commands are described in chapter 6, “Commands” in the

DAQSTATION CX1000/CX2000

Communication Interface User’s Manual (IM04L31A01-17E)

New Commands

Basic Setting Commands (Control)

• Event output setting

MN Sets the event output setting method

Syntax MN p1<terminator>

p1: Event output setting method (common or separate)

Query MN[ p1]?

Changed Commands

Setting Commands (Control)

• Event output setting

EO Sets the event output

When the event output setting method is separate

Syntax EO p1,p2,p3,p4,p5<terminator>

p1: Pattern number (1 to 30)

p2: Event kind (TimeEvent, PVEvent)

p3: Event number (1 to 16)

p4: Enable/disable relay output (Off, On)

p5: Relay number*

*: DO001 to DO006

DO101 to DO106

DO201 to DO206

RO001 to RO012 (expansion module)

SW001 to SW036 (internal switch)

DO001 to DO006, SW001 to SW018 on the CX1000.

Query EO?

When the event output setting method is Common

Syntax EO p1,p2,p3,p4<terminator>

p1: Event kind (TimeEvent, PVEvent)

p2: Event number (1 to 16)

p3: Enable/disable relay output (Off, On)