User’s Manual DAQSTATION CX1000/CX2000 Functional Changes Resulting from Firmware Upgrade (Version 3.
Contents Overview of the Functional Changes ................................................................................................................... 3 Procedure for Checking the Firmware Version .................................................................................................... 3 Operations on the CX1000/CX2000 .......................................................................................................................
This manual explains the functions that have been changed on the CX1000/CX2000 with firmware version 3.02. If you purchased a CX1000/CX2000 with firmware version 3.02 or later, change the contents of the following manuals with the contents of this manual. Manuals Provided on the CD-ROM Manual Title Manual No. Description CX1000 User’s Manual IM 04L31A01-03E See this manual for the descriptions of the CX1000 operations.
Operations on the CX1000/CX2000 With the functional changes, the operations on the CX1000/CX2000 change as follows: Event Output Setting in Basic Control Settings (New Operation) Select Common or Separate by carrying out the procedure described below. • Common (factory default setting) Set a common event output setting for all program patterns. • Separate Set the event output for each program pattern.
Operations on the CX1000/CX2000 Setup Procedure 1. Use the arrow keys to move the cursor (blue) to the [Event output setting] box. A soft key menu is displayed at the bottom of the display. 2. Press the [Common] or [Separate] soft key. The box for the item you changed turns yellow, and the cursor moves to the next item. 3. Press the DISP/ENTER key to confirm the changes. The boxes for the items you changed turn from yellow to white, and the cursor returns to the first item box. Saving the Settings 1.
Operations on the CX1000/CX2000 • If you selected [Separate] for Event output setting in Basic Control Settings On the CX1000 Press the keys in the following sequence: MENU key (switch to the setting mode (control)) > #7 soft key (select [Programcontrol parameters]) > #6 soft key (select [Event output setting]) From the operation display, use the above keys to open the following display.
Operations on the CX1000/CX2000 Changing the Displayed Language You can select [Chinese] by carrying out the procedure below. Displaying the Setting Display On the CX2000 Press the keys in the following sequence: MENU key (switch to the setting mode (control)) > Hold down the FUNC key for 3 seconds (switch to the basic setting mode) > #9 soft key (select [Aux, Time zone]) From the operation display, use the above keys to open the following setting display.
Operations on the CX1000/CX2000 Saving the Settings 1. Press the ESC key. The display returns to the basic setting menu. 2. Press the [End] soft key. A window appears for you to confirm the saving of the new settings. 3. Select [Yes] and press the DISP/ENTER key. Precautions to Be Taken When Loading Setup Data As a general rule, load setup data of the same firmware version. If you must load setup data of different versions, note the following points.
Operations on the DAQSTANDARD With the functional changes on the CX1000/CX2000, the operations on the DAQSTANDARD change as follows: System Configuration When creating a new hardware configuration file or when changing the system configuration to match the specifications of the CX to be connected after opening an existing hardware configuration file, set Style to Style3 and select the Ver 3.02 or later check box. For a description of other setup parameters, follow the explanations in section 3.
Operations on the DAQSTANDARD Event Output Setting in Program Control Related Setup Operations If you set [Event Output] to [Separate], select the pattern number in the [Pattern No.] list box. For a description of the setup parameters of event output setting, follow the explanations in “Event Output Setting (PV event-relay output/Time event-relay output/ Program pattern end signal)” in section 3.6, “Program Control Related Setup Operations” in the DAQSTANDARD User’s Manual (IM 04L31A01-61E).
List of Parameters List of Parameters are given in the DAQSTATION CX2000 Operation Guide (IM04L31A01-02E) or the DAQSTATION CX1000 Operation Guide (IM04L31A01-04E). With the functional changes, the parameters below (underlined sections) have been changed. Basic Setting Mode CX2000: #9 AUX, Time zone CX1000: #12 AUX, Time zone Chinese has been added to AUX > Language.
Communication Commands Communication commands are described in chapter 6, “Commands” in the DAQSTATION CX1000/CX2000 Communication Interface User’s Manual (IM04L31A01-17E).
Communication Commands PA Program pattern end signal When the event output setting method is separate Syntax PA p1,p2,p3 p1: Pattern number (1 to 30) p2: Enable/disable relay output (Off, On) p3: Relay number* *: DO001 to DO006 DO101 to DO106 DO201 to DO206 RO001 to RO012 (expansion module) SW001 to SW036 (internal switch) DO001 to DO006, SW001 to SW018 on the CX1000.
MEMO 14 IM 04L31A01-05E
MEMO IM 04L31A01-05E 15
YOKOGAWA ELECTRIC CORPORATION Headquarters 2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 JAPAN Sales Headquarters 2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 JAPAN Phone : 81-422-52-6194 Branch Sales Offices Nagoya, Osaka, Hiroshima, Fukuoka, Sapporo, Sendai, Ichihara, Toyoda, Kanazawa, Takamatsu, Okayama, and Kitakyusyu.
