Owner's manual

App-28 IM 04L31A01-01E
#10 Control
<#1 Control action,Input setting>
Parameter Initial Value
Control action > PID number 8
Control action > Control period 250ms
Control action > Zone PID Off
Control action > Restart mode Continue
Control action > Initial PID Temp
Control action > 6/4loop select 6loop
Control action > Auto tuning Off
Control action > Loop number 1
Control action > Control mode Single
Control action > Program control Off
Control action > PID control mode Follow-up
Input setting > Loop number 1
Input setting > Burnout > Measure1 up
Input setting > Burnout > Measure2 up
Input setting > Burnout > Remote up
Input setting > RJC > Measure1 Internal
Input setting > RJC > Measure2 Internal
Input setting > RJC > Remote Internal
<#2 DI/DO/SW-registration, AUX (Alarm mode...)>
Parameter Initial Value
DI/DO/SW-registration > Module CTRL1-2
DI/DO/SW-registration > DI101 to 106 None
DI/DO/SW-registration > RI001 to 012 None
AUX > Loop number 1
AUX > Remote setting Off
AUX > Alarm mode ALWAYS
AUX > SP No. selection source > Loop number 1 to 6 1: On, 2-6: Off
AUX > PV/SP math Off
AUX > CLOG error Error
AUX > Event output setting Separate
<#3 Output processing>
Parameter Initial Value
Loop number 1
Control output Current-output
Cycle time 30s
Analog-output type 4-20mA
Appendix 6 Initial Values