Owner's manual

11-15
IM 04L31A01-01E
Operations of Other Functions
11
11.7 Setting the Batch Information (/BT1 option)
This section explains how to set the items that are attached to the data acquired in the
internal memory.
In addition you can set whether or not to use the following functions:
• Automatically increment the lot number at the end of the batch.
• Display the batch number and lot number for each file in place of the date and time
the data acquisition ended, on the memory summary screen.
Procedure
Opening the Operation Display
Press the keys in the following sequence:
MENU key (switch to Set mode) > > MENU key (switch to Set mode) > #9 soft key
(select [Batch set])
The following display appears.
Operations on the Display
1. Use the arrow keys to move the cursor (blue) to [Batch].
[Use] and [Not] soft keys are displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item.
3. Press the DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Saving the Settings in Basic Setting Mode
1. Press the ESC key.
The display returns to basic setting menu.
2. Press the [End] soft key.
A confirmation dialog box appears
3. Select [Yes] and press the DISP/ENTER key.
The operation screen is displayed.