Owner's manual

11-11
IM 04L31A01-01E
Operations of Other Functions
11
11.5 Setting the Measurement Remote Input (/A6R
option or /A4FR option)
This section explains how to assign a particular action to the remote input terminal
[REMOTE] of the measurement alarm option terminal block.
Procedure
Opening the Operation Display
Press the keys in the following sequence:
MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds (switch
to basic setting mode) > #6 soft key (select [Option])
The following display appears.
Operations on the Display
1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next
item.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
4. Press the DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Saving the Settings in Basic Setting Mode
1. Press the ESC key.
The display returns to basic setting menu.
2. Press the [End] soft key.
A confirmation dialog box appears
3. Select [Yes] and press the DISP/ENTER key.
The operation screen is displayed.