Owner's manual

11-4 IM 04L31A01-01E
2. Press the [Keylock] soft key.
3. Press the DISP/ENTER key.
Note
While the keylock function is enabled, a keylock icon (see section 1.16 ) appears in the status
indication section. If you press a locked key while the keylock function is enabled, a message
“This key is locked” appears.
Releasing the Keylock
1. In operation mode, press the FUNC key.
The soft key menu is displayed.
2. Press the [Keylock] soft key.
The password entry window appears.
3. Enter the password using the soft keys and character/number input keys.
4. Press the DISP/ENTER key.
Setup Items
Setting the Keylock
• Use/Not
To enable the keylock function select [Use].
• Password
Enter the password for releasing the keylock. Set the password using up to 6
characters.
• Keylock Items
Select [Lock] to apply the keylock function to the key; select [Free] otherwise.
Keylock Items
• Operation keys other than the FUNC key, arrow keys, and character/number input
keys.
• [AlarmACK] soft key.
• [MathSTART], [MathSTOP], and [MathReset] soft keys.
• Soft keys related to memory writing including [Message], [Manual sample],
[Trigger], [Save Display], and [Save Event] soft keys.
• E-mail related soft keys including [E-Mail START], [E-Mail STOP], and [E-Mail test]
soft keys.
• Prohibit data storage when an external storage medium is inserted during manual
save mode and prohibit Zip disk ejection.
• Prohibit Zip disk ejection during auto save mode.
11.2 Key Lock