Owner's manual

ManualsBrandsYokogawa ManualsSensorsData Acquisition with PID Control CX2000

301

302

303

304

305

306

307

308

309

310

10-9

IM 04L31A01-01E

Computation and Report Function Related Operations

(Only on Models with the Computation Function Option)

Operations on the Display

• Setting the timer

1. Use the arrow keys to move the cursor (blue) to the entry boxes under

[Timer(TLOG)].

2. Press the soft key to set the values.

3. Press the DISP/ENTER key.

• Selecting the Timer and Sum Scale

1. Use the arrow keys to move the cursor (blue) to the [First-CH] and [Last-CH]

boxes.

2. Press the soft key corresponding to the start and end channel numbers for

setting the TLOG computation.

3. Use the arrow keys to move the cursor to the [Timer No.] or [Sum scale] box

under [TLOG].

4. Select the value using the soft key.

5. Press the DISP/ENTER key.

Saving the Settings in Basic Setting Mode

1. Press the ESC key.

The display returns to basic setting menu.

2. Press the [End] soft key.

A confirmation dialog box appears

3. Select [Yes] and press the DISP/ENTER key.

The operation screen is displayed.

Setup Items

Setting Timer for TLOG Computation

• Mode

Select either [Relative] or [Absolute].

When Relative Is Selected

• Interval

Set the time until the end of the interval in “hour:minute” (00:01 to 24:00).

• Reset

Set whether to reset the TLOG computation value at every interval [On] or [Off].

• Action

If set to [DataSave], the instantaneous values of all measurement/computation

channels are written to the internal memory at every interval. Select [Off] to disable

this function.

When Absolute Is Selected

• Interval

Set the time until the end of the interval from the following 19 types.

1min, 2min, 3min, 4min, 5min, 6min, 10min, 12min, 15min, 20min, 30min, 1h, 2h,

3h, 4h, 6h, 8h, 12h, and 24h

• Ref. time

Set the time to be used as the reference. The reference time is set in the range of

0:00 to 23:00 at 1 hour steps.