Owner's manual

10-2 IM 04L31A01-01E
Setup Procedure
• Assigning Computation Channels
1. Use the arrow keys to move the cursor (blue) to the [First-CH] and [Last-CH] boxes.
2. Press the soft key corresponding to the start and end channel numbers for
setting the computation channels.
3. With the cursor (blue) at the [Math On/Off] box, press the [On] soft key.
The [Calculation expression], [Span Lower], [Span Upper], and [Unit] boxes
appear.
• Calculation expression
1. With the cursor (blue) at the [Calculation expression] box, press the [Input] soft
key.
The following expression pop-up window appears.
2. Enter the equation using the soft keys and character/number input keys.
3. Press the DISP/ENTER key.
The input equation is displayed in the [Calculation expression] box.
• Span Lower/Upper, Unit
1. With the cursor (blue) at the [Span Lower], [Span Upper], and [Unit] boxes,
press the [Input] soft key.
2. Enter the values using the soft keys and character/number input keys.
3. Press the DISP/ENTER key.
• Constant
1. Use the arrow keys to move the cursor (blue) to the desired constant [K01] to
[K30] under [Constant] you wish to change.
2. Enter the constant using the soft keys and character/number input keys.
3. Press the DISP/ENTER key.
• Tag
1. Use the arrow keys to move the cursor (blue) to the [First-CH] and [Last-CH]
boxes.
2. Press the soft key corresponding to the start and end channel numbers for
setting the tag.
3. Move to the [Tag] box using the arrow keys.
4. Enter the tag using the soft keys and character/number input keys.
5. Press the DISP/ENTER key.
Setup Items
Assigning Computation Channels
• First-CH/Last-CH
You can assign channel numbers [31] to [60] as computation channels. The range of
numbers here is used to set the range of channels for setting the computation
function.
• Math Off/On
Turn ON/OFF the computation function for the computation channels specified by
First-CH and Last-CH.
10.1 Assigning Computation Channels and Setting Computing Equations, Constants and Tags