Owner's manual

8-10 IM 04L31A01-01E
8.7 Measurement Function > Operations When
Displaying the Historical Trend
This section explains the operations that you can perform when displaying the historical
trend. For a description on the displayed contents when the historical trend is displayed
and other operations not described below, see
pages 1-78 to 1-79 .
Procedure
Zooming in or out on the Time Axis
1. Press the DISP/ENTER key to show the display selection menu.
[TREND HISTORY] is highlighted.
2. Press the right arrow key to display the sub menu.
3. Select [ZOOM +] or [ZOOM -] using the up and down arrow keys.
4. Press the DISP/ENTER key to zoom in or zoom out on the time axis.
Changing the Displayed Group on the Historical Trend Display and All Channel Display
1. Press the DISP/ENTER key to show the display selection menu.
[TREND HISTORY] is highlighted.
2. Press the right arrow key to display the sub menu.
3. To change the displayed group, select the group from [GROUP 1] to [GROUP 10] using
the up and down arrow keys. To display all channels, select [ALL CHANNEL].
To set the display back to group display from [ALL CHANNEL], select [GROUP
CHANNEL] in this step.
4. Press the DISP/ENTER key to switch to the all channel display.
Displaying Memory Information
1. Press the DISP/ENTER key to show the display selection menu.
[TREND HISTORY] is highlighted.
2. Press the right arrow key to display the sub menu.
3. Select [INFORMATION ON] using the up and down arrow keys.
4. Press the DISP/ENTER key to show the memory information.
To clear the displayed memory information, press the DISP/ENTER key or an arrow key.