Owner's manual

8-9

IM 04L31A01-01E

Operations for Changing the Displayed Contents

8.6 Measurement Function > Operations When

Displaying the Overview

This section explains the operations that you can perform when displaying the overview.

Overview cannot be selected on 0 measurement channel models without the calculation

option installed.

Procedure

Turning OFF the Cursor

1. Press the DISP/ENTER key to show the display selection menu.

[OVERVIEW] is highlighted.

2. Press the right arrow key to display the sub menu.

3. Select [CURSOR OFF] using the up and down arrow keys.

4. Press the DISP/ENTER key to confirm the change.

Switching to Trend Display or Bar Graph Display

1. Select the desired channel using the arrow keys.

2. Press the DISP/ENTER key to show the display selection menu.

[OVERVIEW] is highlighted.

3. Press the right arrow key to display the sub menu.

4. Select [JUMP TO TREND] or [JUMP TO BAR] using the up and down arrow

keys.

5. Press the DISP/ENTER key to switch to the trend or bar graph display.