Owner's manual

7-1
IM 04L31A01-01E
Measurement Function Related Setup Operations
7
Chapter 7 Measurement Function Related Setup Operations
7.1 Settings Related to Measurement Inputs
This section explains how to set parameters related to measurement input of the
measurement function such as A/D integral time, scan interval, and range.
Procedure
Opening the Setting Display
• When Setting the A/D Integral Time, Scan Interval, Etc.
Burn out and RJC settings cannnot be entered on 0 measurement channel models
(the setting menu is not displayed).
Press the keys in the following sequence:
MENU key (switch to the Setting mode (Control)) > Hold down the FUNC key for
3 seconds (switch to basic setting mode) > #1 soft key (select [Alarm, A/D,
Temperature])
The following display appears.
• When Setting the Range
Range settings cannnot be entered on 0 measurement channel models. An error
message will appear if the range or alarm setting screen is selected.
Press the keys in the following sequence:
MENU key (switch to the Setting mode (Control)) > MENU key (switch to the Set
mode) > #1 soft key (select [Range, Alarm])
The following display appears.