Owner's manual

6-2 IM 04L31A01-01E
2. Press the [RUN/STP] soft key.
A pop-up window for running and stopping the operation appears.
Window for starting and
stopping operation
3. Select [RUN] or [STOP] using the up and down arrow keys.
4. Press the DISP/ENTER key to confirm the changes.
To close the window without making any changes, press the ESC key.
Switching between Auto, Manual, and Cascade Control
You can only switch to the cascade mode on the secondary loop of cascade control.
1. Use the arrow keys to move the cursor to the desired control loop.
2. Press the [Mode] soft key.
The MODE selection pop-up window appears.
MODE selection window
3. Select [AUT] (auto), [MAN] (manual), [CAS] (cascade) using the up and down
arrow keys.
4. Press the DISP/ENTER key to confirm the changes.
To close the window without making any changes, press the ESC key.
Changing the SP
1. Use the arrow keys to move the cursor to the desired control loop.
6.1 Operations on the Control Group Display (Switching Displayed Information and Control Operation Modes)