Owner's manual

4-39

IM 04L31A01-01E

Control Function Related Setup Operations

4.16 PV/SP Computation and Analog Retransmission

Settings (Style Number S3 or Later)

This section explains the control function’s PV/SP computation and analog

retransmission setting procedure.

Procedure

Opening the Setting Display

Press the keys in the following sequence:

MENU key (switch to setting mode (control)) > #8 soft key (select [Control math

setting], #9 soft key when program control is ON) > #1 soft key (PV/SP math,

Retransmission)

The following display appears.

Setup Procedure

1. Use the arrow keys to move the cursor (blue) to the item box you wish to

change.

A soft key menu is displayed at the bottom of the display.

2. Press the soft key corresponding to the value you wish to select.

The box for the item you changed turns yellow, and the cursor moves to the next

item box.

3. Repeat steps 1 and 2 to change the value of all the items you wish to change.

Note

For setup item boxes that require values to be entered, a pop-up window that appears by

pressing the [Input] soft key is used.

4. Press the DISP/ENTER key to confirm the changes.

The boxes for the items you changed turn from yellow to white, and the cursor

returns to the first item box.

5. With Yes selected, press DISP/ENTER key to confirm the changed settings.

The item boxes for the changed items turn from yellow to white, and the cursor

returns to the top item.