Owner's manual

4-15

IM 04L31A01-01E

Control Function Related Setup Operations

4.5 Control > Tuning setting

This section explains the procedures for setting the parameters that are adjusted on the

tuning display.

Procedure

Opening the Setting Display

Press the keys in the following sequence:

MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds (switch to

basic setting mode) > #10 soft key (select [Control]) #5 soft key (select [Tuning setting])

The following setting display appears.

Setup Procedure

1. With the cursor (blue) located at the [Loop number] box, select the loop number for

setting the tuning parameter using the soft keys.

The selected loop number is displayed in the [Loop number] box, and the cursor

moves to the On/Off box of [01:].

2. Using the arrow keys, move the cursor to the On/Off box of the tuning parameter

you wish to change or the [Item name] box.

The box for the item you changed turns yellow, and the cursor moves to the next item.

Note

The [Item name] is set using the pop-up window that appears by pressing the [Detail] soft key.

On the pop-up window, set [Item ID] and [Item name]. Select [Item ID] using the soft key menu.

Enter [Item name] by pressing the [Input] soft key and using the character/number input keys.

3. Repeat steps 1 and 2 to change the value of all the items you wish to change.