Owner's manual

4-11

IM 04L31A01-01E

Control Function Related Setup Operations

4.3 Control > Output processing

This section describes the procedures for selecting the control output type, cycle time,

and analog output. To perform ON/OFF control, set [Control output] to [On/Off-control].

Procedure

Opening the Setting Display

Press the keys in the following sequence:

MENU key (switch to Set mode) > Hold down the FUNC key for 3 seconds (switch

to basic setting mode) > #10 soft key (select [Control]) #3 soft key (select [Output

processing])

The following setting display appears.

Setup Procedure

1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.

A soft key menu is displayed at the bottom of the display.

2. Press the soft key corresponding to the value you wish to select.

The box for the item you changed turns yellow, and the cursor moves to the next

item.

3. Repeat steps 1 and 2 to change the value of all the items you wish to change.

4. Press the DISP/ENTER key to confirm the changes.

The boxes for the items you changed turn from yellow to white, and the cursor

returns to the first item box.

Note

The [Cycle time] is set using the pop-up window that appears by pressing the [Input] soft key.

Saving the Settings

1. Press the ESC key.

The display returns to basic setting menu.

2. Press the [End] soft key.

A confirmation dialog box appears

3. Select [Yes] and press the DISP/ENTER key.

The operation screen is displayed.