User guide

IM 04L31A01-02E

List of Parameters

#6 Time

Parameter Selectable Range or Selections Initial Value

Time set > YY/MM/DD HH/MM/SS – –

#7 Math set1 (expression, alarm, constant)

Parameter Selectable Range or Selections Initial Value

First-CH 31 to 60 31

Last-CH 31 to 60 31

Math range > Math On/Off On/Off Off

Math range > Calculation expression 40 characters or less. 01

Math range > Span Lower –9999999 to 99999999 (decimal point: within 4 digits to –200.00

the right of the decimal point)

Math range > Span Upper –9999999 to 99999999 (decimal point: within 4 digits to 200.00

the right of the decimal point)

Math range > Unit Up to 6 alphanumeric characters –

Alarm > 1 to 4 On/Off Off

Alarm > Type H, L, T, or t H

Alarm > Value Value within the measurement span 0.00

Alarm > Relay On/Off On/Off Off

Alarm > Relay Number I01 to I06, DO001 to DO006, DO101 to DO106, I01

DO201 to DO206, RO001 to RO012, or SW001 to SW036

Alarm > Detect On/Off On

Constant > K01 to K30 –9.9999E+29 to –1.0000E–30, 0, 1

1.0000E–30 to 9.9999E+29

#8 Math set2 (tag, TLOG, rolling average, alarm delay)

Parameter Selectable Range or Selections Initial Value

First-CH 31 to 60 31

Last-CH 31 to 60 31

Tag > Tag Up to 16 alphanumeric characters 31

TLOG > Timer No. 1, 2, or 3 1

TLOG > Sum scale Off, /s, /min, or /h Off

Rolling average > On/Off On/Off Off

Rolling average > Interval 1 s, 2 s, 3 s, 4 s, 5 s, 6 s, 10 s, 12s, 15s, 20s, 30s, 10 s

1 min, 2 min, 3 min, 4 min, 5 min, 6 min, 10 min, 12 min,

15 min, 20 min, 30 min, or 1 h

Rolling average > Number of samples 1 to 64 1

Alarm delay 1 s to 3600 s 10 s

#9 Batch set

Parameter Selectable Range or Selections Initial Value

Application name Up to 16 alphanumeric characters –

Supervisor name Up to 16 alphanumeric characters –

Manager name Up to 16 alphanumeric characters –

Batch number Up to 16 alphanumeric characters –

Lot number Up to 4 alphanumeric characters –

Auto increment On/Off On

Disp information Batch, Time Batch