User guide
50 IM 04L31A01-02E
Parameter Value or Selections Initial Value
Control mode SingleLoopControl, CascadePrimaryLoop, CascadeSecondaryLoop, SingleLoopControl
CascadeControl, ControlBackup, PVSwitching, PVAutoSelector,
PVHoldFunction, DualLoopControl, Temperature-Humidity,
Cascade-2Uni, PVSwitching-2Uni, or PVAutoSelector-2Uni
Control output Relay, Voltage-pulse, Current-output, or On/Off-control Relay
Alarm Off, PH-H-E (PV high-limit alarm (energize)), Off
PV-L-E (PV low-limit alarm (energize)),
Dev-H-E (Deviation high-limit alarm (energize)),
Dev-L-E (Deviation low-limit alarm (energize)),
Dev-H-D (Deviation high-limit alarm (deenergize)),
Dev-L-D (Deviation low-limit alarm (deenergize)),
Dev-HL-E (Deviation high & low limit alarm (energize)),
D-W-HL-E (Deviation within high & low limits alarm (energize)),
PV-H-D (PV high-limit alarm (deenergize)),
PV-L-D (PV low-limit alarm (deenergize)),
PV-H-ES (PV high-limit alarm (energize/hold)),
PV-L-ES (PV low-limit alarm (energize/hold)),
Dev-H-ES (Deviation high-limit alarm (energize/hold)),
Dev-L-ES (Deviation low-limit alarm (energize/hold)),
Dev-H-DS (Deviation high-limit alarm (deenergize/hold)),
Dev-L-DS (Deviation low-limit alarm (deenergize/hold)),
Dev-HL-ES (Deviation high & low limit alarm (energize/hold)),
D-W-HL-ES (Deviation within high & low limits alarm (energize/hold)),
PV-H-DS (PV high-limit alarm (deenergize/hold)),
PV-L-DS (PV low-limit alarm (deenergize/hold)),
TimeUp1 (Timer, upward detection, hours & minutes),
TimeDown1 (Timer, downward detection, hours & minutes),
TimeUp2 (Timer, upward detection, minutes & seconds),
TimeDown2 (Timer, downward detection, minutes & seconds),
Sensor (Sensor grounding alarm),
Prog-Diag (Self diagnosis output), FAIL (FAIL output),
SP-H (SP high-limit), SP-L (SP low-limit),
Out-H (Output high-limit), Out-L (Output low-limit),
Burnout1 (Heater burnout alarm 1), or
Burnout2 (Heater burnout alarm 2),
#2 Parameter address setting
Loop number Ext1 to Ext16 Ext1
PV: Input 30001 to 39999, 300001 to 365535, 40003
40001 to 49999, or 400001 to 465535
SP : Setting 30001 to 39999, 300001 to 365535, 40004
40001 to 49999, or 400001 to 465535
OUT: Output 30001 to 39999, 300001 to 365535, 40005
40001 to 49999, or 400001 to 465535
Control mode 30001 to 39999, 300001 to 365535, 40008
40001 to 49999, or 400001 to 465535
Remote/Local 30001 to 39999, 300001 to 365535, 40008
40001 to 49999, or 400001 to 465535
Operation STOP/RUN 30001 to 39999, 300001 to 365535, 40205
40001 to 49999, or 400001 to 465535
Alarm status 30001 to 39999, 300001 to 365535, 40011
40001 to 49999, or 400001 to 465535
SP number 30001 to 39999, 300001 to 365535, 40010
40001 to 49999, or 400001 to 465535
PID number 30001 to 39999, 300001 to 365535, 40009
40001 to 49999, or 400001 to 465535
Auto reading 30001 to 39999, 300001 to 365535, 40008
40001 to 49999, or 400001 to 465535
List of Parameters