User guide

22 IM 04L31A01-02E
3. Press the arrow keys to move the cursor (blue) to the Input type box, press the PV1
soft key, and set other parameters as shown in the figure below.
Check that 1 is
selected
Select 1-5V
Select PV1
Set to 0.00
Set to 300.00
Set to kg/h
4. Press the DISP/ENTER key.
A confirmation window opens.
5. Press the DISP/ENTER key to confirm the settings.
6. Press the arrow keys to move the cursor (blue) to the Input type box, press the PV2
soft key, and set other parameters as shown in the figure below.
Check that 1 is
selected
Select 1-5V
Select PV2
Set to 0.00
Set to 30.00
Set to kg/h
7. Press the DISP/ENTER key.
A confirmation window opens.
8. Press the DISP/ENTER key to confirm the settings.
9. Press the arrow keys to move the cursor (blue) to the Input type box, press the
PVrange soft key, and set other parameters as shown in the figure below.
Set to 0.00
Set to 300.00
Set to kg/h
Check that 1 is
selected
Select PVrange
10. Press the DISP/ENTER key.
A confirmation window opens.
11. Press the DISP/ENTER key to confirm the settings.
Examples of Control Setup Operation