User guide

17
IM 04L31A01-02E
9. Press the End soft key.
A confirmation window shown below opens.
10. Press the DISP/ENTER key to confirm the settings.
Setting the Control Input Range in Setting Mode
1. From the operation display, click the MENU key to display the control setting menu
shown below.
2. Press the #1 soft key (Control input range).
3. Press the arrow keys to move the cursor (blue) to the setup item box, press the soft
key of each value according to the following figure.
To set the measurement span (span lower/upper-limit, press the Input soft key to
open a numeric entry pop-up window as shown in the figure below. Enter the value
using the Character/Number key and the Space soft key and then press the DISP/
ENTER key.
Setting the Input Range on the Primary Loop of Cascade Control
Select 1
Select RTD
Select PT
Set to 0.0
Set to 100.0
Numeric entry pop-up
window
4. Press the DISP/ENTER key.
A confirmation window shown below opens.
5. Press the DISP/ENTER key to confirm the settings.
Examples of Control Setup Operation