User guide

16 IM 04L31A01-02E

Select 1

(No need to set loop 2)

Select Cascade

Select Tem or

Press+Flow

Press the ESC key to return to the basic control setting menu.

Press the #3 soft key (Output processing).

Press the 2 soft key.

There are no control output settings on loop 1 (primary loop of cascade control).

Press the arrow keys to move the cursor (blue) to the setup item box, press the soft

key of each value according to the following figure, and press the DISP/ENTER key.

Select 2

Select 4-20mA

Select Current-output

* No need to set

Cycle time

Press the ESC key twice to return to the menu display (basic setting mode 2/2).

Examples of Control Setup Operation