User guide

IM 04L31A01-02E

Setting the Control Input Range in Setting Mode

From the operation display, click the MENU key to display the control setting menu

shown below.

Press the #1 soft key (Control input range).

Press the arrow keys to move the cursor (blue) to the setup item box, press the soft

key of each value, and press the DISP/ENTER key.

To set the measurement span (span lower/upper-limit, press the Input soft key to

open a numeric entry pop-up window as shown in the figure below. Enter the value

using the Character/Number key and the Space soft key and then press the DISP/

ENTER key.

Select 1

Select TC

Select K

Select PV1

Set to 0.0

Set to 1200.0

Numeric entry pop-up

window

Press the DISP/ENTER key.

A confirmation window shown below opens.

Press the DISP/ENTER key to confirm the settings.

Examples of Control Setup Operation