Instruction Manual

3-1
IM 04L41B01-65EN
Receiving and Sending Setup Data
1
2
3
4
Index
3.1 Connecting to the DXP
Notes about Sending and Receiving
Note
• TheCommunicatorSoftwarecanconnecttotheDXPstylenumberS4orlater.
• OnlytheadministratorsthatareregisteredtothetargetDXPcanconnecttoit.
• ConnectionisnotpossibleifthereisauserloggedinusingthekeysontheDXPorifthere
is a user connected to the setting function via the communication interface.
• Connectionisnotpossibleifauserwiththesameusernameisalreadyconnectedvia
thecommunicationinterface(thesetting/measurementserver,themonitorfunctionofthe
maintenance/testserver,ortheFTPserver).
• IftheDXPisconfigurednottousetheloginfunction(noadministratorsareregistered),you
can connect to the DXP by entering the IP address or host name in the IP address box.
• TheManagerislockedwhileconnectedtotheDXP.
Password
Note
Default password
For the following cases, enter the default password in the Password box.
• Connectingforthefirsttimeafteruserregistration.
• Connectingforthefirsttimeafterresettingthepasswordbecausetheuserwas
invalidated.
User Default Password
Administrator 1 to 3 Admin1, Admin2, and Admin3
User 01 to 30 User01, User02, User03, ... , User29, and User30
User Locked
The user who is invalidated through the key operation on the DXP cannot log in from the
DDX-PHardwareConfigurator.
When the password is expired
Click here.
Enter the password.
For a description of the password,
see “Note” below.
Note
New password
• Enterthepasswordusing6to8characters.
• Spacesarenotallowed.
• CombinationsoftheuserIDandpasswordthathavebeenusedinthepastarenotallowed.
Chapter 3 Receiving and Sending Setup Data