Instruction Manual

2-33
IM04L41B01-65EN
1
2
3
4
Index
Viewing and Creating Setup Data
2.7 Adjusting the Setup Data (Checking the Data)
Checking the Setup Data
2. If the data are not consistent,
the [Data Adjustment] dialog
box opens (see the description below).
Click here to display the correction list
2. If the data are not consistent,
they are automatically corrected.
1. Click here ([System] - [Data Adjustment]).
or
The data are corrected in the following cases:
• WhenthevaluesoftheitemsoftheMeas/Mathtabareoutsidetherange.
• Whenaninvalidcharacterstringisused
• Whenasetpointvalueinthecalibrationcorrectionsettingiswrong.
[Data Adjustment] Dialog Box
Select[View]-[DataAdjustmentDialog]tousethe[DataAdjustment]dialogbox.
If[View]-[DataAdjustmentDialogBox]ischecked,the[DataAdjustment]dialogboxwill
open when the data are not consistent at the time of the data check or at the time of data
transmission.