Instruction Manual

2-31

IM04L41B01-65EN

Index

Viewing and Creating Setup Data

Setting the E-Mail Transmission

Transmit e-mail when creating a report.

Select the recipient

Select the alarm

Transmit e-mail when storage medium error, etc.

are detected.

Transmit e-mail at specified time.

Transmit e-mail when alarm occurred/released.

Attach measured/computed data at that time 0

• SMTP server name

Set the SMTP server name (up to 64 alphanumeric characters) or the IP address of

the SMTP server.

• Port number

Set the port number to use in the range from 1 to 65535. The default value is [25].

• Recipient

Set the transmission destination of the e-mail message using up to 150 alphanumeric

characters. You can specify multiple addresses. To specify multiple addresses, delimit

the addresses using spaces.

• Sender

Set the e-mail address using up to 64 alphanumeric characters. If the address is not

set,therstaddresssetintherecipientboxisusedasthesender’saddressinstead.

• Alarm

 Transmitsane-mailmessagewhenalarmisactive/released.

• Scheduled

Transmits an e-mail message when the specified time is reached.

• System

Transmits an e-mail message during recovery from a power failure, when memory end

is detected, or when an error related to the external storage medium and FTP client

occurs

• Report

Transmits an e-mail message when report is created (only on models with the optional

computationfunction(/M1)

• Subject, Header1, Header2

 Subject:Setthesubjectofthee-mailmessageusingupto32alphanumeric

characters.

Header1 and Header2: Set the string to be attached to the e-mail message using up t

64 alphanumeric characters.

2.6 Configuring the System Mode