Instruction Manual

2-28
IM04L41B01-65EN
Setting the Serial Communication
• Data Length
Select the data length from the following list. Make sure to select 8 bits when
outputting data in binary format.
• RS232 Handshaking
Select the handshaking method from the following list. This setting is valid only for the
RS-232 interface.
• RS-422A/485 Address
 Selecttheaddressfrom1to32.ThissettingisvalidfortheRS-422A/485interface
and the Modbus protocol.
• RS-422A/485 Protocol
OFF: Serial communication is disabled.
 NORMAL:Setting/measurementserver
MODBUS: Modbus slave
MODBUS MASTER: Modbus master
 BARCODE:Barcodeinput
2.6 Configuring the System Mode