Instruction Manual

2-26
IM04L41B01-65EN
Network
The“MemoryDataOut”settingisvoidontheDX100P/DX200P.
Setting the TCP/IP
1. Click here (also selectable from [Setting] - [System Mode Setting])
2. Select this tab
Set the IP
address
Enter the timeout value when
turned ON
Set these
addresses
when using
the DNS
DNS setting
You must set the DNS, if you are using a host name to specify the destination server of
the file transfer on an FTP client or the server of the e-mail recipient.
Host Name, Domain Name, Domain Suffix: Up to 64 characters
Keep Alive
This function forcibly drops the connection if there are no responses to the test packets
thataresentperiodically(every30seconds)attheTCPlevel.
Timeout
ThisfunctiondropstheconnectionifnodatatransferisdetectedbetweenthePCandthe
DXP over a predetermined period of time. This applies to data transfer at the application
level only.
To use this function, select [ON] and enter a time period (1 to 120 min).
Communication Input Available User
Specifyauserthatusesthecommunicationinputdata(DX100P:C01toC12,DX200P:
C01toC30)from[Admin1]to[User30],and[Serial](/C2or/C3option).
Serial: The communication input data can be used via the serial communication.
Memory Data Out
Select [Ethernet].
2.6 Configuring the System Mode