Instruction Manual

2-15
IM04L41B01-65EN
1
2
3
4
Index
Viewing and Creating Setup Data
Message/File
Enter the group name.
Select the group.
Enter the message.
Click here (also selectable from [Setting] -
[Engineering Mode Setting]).
Copy and paste the
message.
Enter the comment.
Enter the save destination folder.
Message number
Resets the range selection.
Note
Messages 1 to 8 of the message group 7 can be assigned to the USER key and the remote
controlfunction(option,/R1).
Group Name
Up to 16 characters can be entered for the message.
Message
Up to 32 characters can be entered for the message.
File Header
Addsacomment(upto32characters)totheheadersectionofthemeasured/computed
data file.
Directory Name
Setthenameofthefolder(upto8characters)inwhichthemeasured/computeddata
files is to be saved.
Note
• AUX,CON,PRN,NUL,andCLOCKcannotbeusedasthedirectoryname.
• Ifthedirectorynameisnotspecified,DATA0(default)isautomaticallyset.
Copying and Pasting the message
1.
 Clickthemessagenumberofthecopysource.Toselectmultiplemessagestobe
copied, drag the message number to specify the range to be copied.
2.
 Click[Copy].
3.
 Clickthemessagenumberofthepastedestination.Toselectmultiplepaste
destinations, select the range in a similar fashion.
4.
 Click[Paste].
2.5 Confiuring the Engineering Mode