Instruction Manual

2-10
IM04L41B01-65EN
Copying and Pasting Setup Data
Theitemscheckedin[CopyDetails]canbecopiedandpasted.
Clickthechannelnumbertoselectthecopysourceorpastedestination.Toselect
multiple channels to be copied, drag the channel number to specify the range to be
copied. To select multiple copy destinations, select the range in a similar fashion.
2. The [Meas. Channel Copy
Details] dialog box opens.
3. Select copy items.
1. Click here.
5. Select the copy source.
4. Click here.
6. Click here.
7. Select the paste destination.
8. Click here.
Setting One Channel at a Time
The items in the [Meas] tab can be configured for each channel. The items that are
configured are the same as those configured on the spreadsheet. For details, see pages
2-6 to 2-9.
2. The channel setting
dialog box opens.
3. Select the tab of the item
to be configured.
4. After setting the
items, click here.
1. Double-click the
channel you wish to set.
Apply the settings.
Update according to the changes
in the [Meas] sheet.
2.3 Setting the Measurement Channels