Instruction Manual

2-9
IM04L41B01-65EN
1
2
3
4
Index
Viewing and Creating Setup Data
Graph
Divisions
Select the number of scale divisions.
Bar Graph
Selectthereferencepositionofthebargraph.Selecting[Center]whenthebargraphis
vertical produces no effect. It is set back to [Normal] when the data are checked.
Scale
When using scale display on the trend screen, select the position to display the scale.
Fordetailsrelatedtodivisions,bargraph,andscale,seesection5.12intheDX100P/
DX200P User’s Manual.
Partial Expanded Display
ON/OFF
Set whether or not to use the partial expanded display for each channel.
Note
The partial expansion settings take effect when the partial expansion function is set to [Use] in
the [Aux] section of the [System Mode] tab.
Position (%)
Set the position to which the boundary value is to be moved. The range is from 1 to 99%.
Boundary
Set the boundary value within the display span.
The conditions used to set the boundary vary depending on the measurement and
computation channels as follows:
• Measurementchannel
WhenSCALEandSQRTarenotused: SpanL<boundary<spanU
WhenSCALEandSQRTareused: ScaleL<boundary<scaleU
• Computationchannel
SpanL<boundary<spanU
Display Color
You can select the display color of each channel from 16 colors.
Clickingthecolorareadisplaysthe[Color]dialogbox.Selectacolorandclick[OK].
2.3 Setting the Measurement Channels