Instruction Manual

1-2
IM 04L41B01-65EN
Connection (Login) Conditions
DXP
(Style S4 or later)
Administrator
Setup data
1
2
3
4
5
6
7
8
9
10
26
27
28
29
30
21
22
23
24
25
16
17
18
19
20
11
12
13
14
15
DISP/
ENTER
Change password
Send setup data
Receive setup data
CH01 TC ON
CH02 TC ON
CH03 TC ON
CH04 TC ON
User name
User ID
Password
• OnlytheadministratorsthatareregisteredtothetargetDXPcanlogin.The
administratorisconrmedusingtheusername,userID,andpassword.
• ConnectionisnotpossibleifthereisauserloggedinusingthekeysontheDXPor
ifthereisauserloggedintothesettingfunctionofthesetting/measurementserver
via the communication interface (see IM04L05A01-17E).
• Connectionisnotpossibleusingausernamethatisalreadyconnected.
Transmitting and Receiving Setup Data
 YoucanloadDXPsetupdata.Youcannotviewthelogininformationandbatch/system
settings.
You can send setup data to the DXP. The contents of [Login information], [Batch
system settings], and [IP Address] are not transmitted.
How Data Is Managed
The setup data is assigned a “configuration serial number” in the order of occurrence.
Thisnumberisrecordedinthebatchdata/continuousdataasapartoftheoperation
log of setting changes. Includes setup data saved using keys on the DXP, setup data
savedusingtheDX-PHardwareConfigurator,andsetupdatareceivedusingthe
CommunicationFunction.Theconfigurationserialnumberis“0.”
2 31
0
Setup data used during
data acquisition
(The data is saved within
the batch data/continuous
data file.)
Other setup data
Setup data when the
settings are changed
Configuration serial number
No configuration serial number
Configuration serial number
*************
***********2
*************
Operation log
1.1 Overview of the DAQSTANDARD