User guide

3-52
M-4659
3.7 Sending the Setup Data to the DX1000/DX2000
Data cannot be sent while the DX1000/DX2000 is starting up (while loading data into
memory) or Math in progress.
1.
Click the [Send Data] button, or choose [Comm.] - [Send Setting] from the menu
bar.
The send settings dialog box opens.
2.
Click [OK] to start sending. A message is displayed when sending is complete.
Click [OK] to clear the message.
Note
The following items located on the setup tab cannot be sent.
• The [Ethernet communication] - [TCP/IP] and [Server functions] setting items
• All serial communication settings