User guide
3-39
M-4659
Configuring the DX1000/DX2000
1
2
3
4
5
6
7
8
Index
Ethernet
TCP/IP
Set the IP address to a fixed IP address or obtain it automatically (DHCP).
Consult with your network administrator for the network parameters such as the IP
address, subnet mask, default gateway, and DNS.
Whenusingafixed IP address
• DHCP
Set [DHCP] to [OFF].
• IP Address
Set the IP address to assign to the DX1000/DX2000.
• Subnet Mask
Set the subnet mask according to the system or network to which the DX1000/
DX2000 belongs.
• Default Gateway
Set the IP address of the gateway.
• Host Name
Set the DX’s host name using up to 64 alphanumeric characters. You do not have to
set this parameter.
• Domain Name
Set the network domain name that the DX1000/DX2000 belongs to using up to 64
characters. You do not have to set this parameter.
• Server Primary, Server Secondary
Register up to two IP addresses for the primary and secondary DNS servers.
• Domain Primary, Domain Secondary
Set up to two domain sufxes: primary and secondary.
3.6 Entering Basic Settings