User guide

3-23
M-4659
Configuring the DX1000/DX2000
1
2
3
4
5
6
7
8
Index
Message
Enter a message to be written to the group of up to 32 alphanumeric characters.
Timer
Changes the upper/lower display area
Timer used by event action. Used also in the TLOG computation of the computation
function.
Up to four timers (1 to 4) can be set.
WhenUsinganAbsoluteTimer
• Mode
Select [Absolute].
• Timeinterval
Select the interval from the available settings between 1min to 24h.
• Ref.time
Set the time in the range of hour 0 to hour 23.
WhenUsingaRelativeTimer
• Mode
Select [Relative].
• Timeinterval
Set in the range from 00:01 (1 min.) to 24:00 (24 hours).
Hour: Set in the range from 0 to 24.
Min: Set in the range from 0 to 59.
• ResetatMathStart
ON Resets the timer when computation is started. The resetting of the timer is not
considered to be a timeout. Even if the timer is used as an event, the action is
not executed.
3.5 Entering General Settings