User guide

4-35
M-4659
Displaying Data with the Data Viewer
1
2
3
4
5
6
7
8
Index
4.11 Saving Display Template
Saving Templates
1.
From the File menu, choose Save Template.
The currently displayed settings are saved as a template le to the same folder
as the displayed data.
Using Templates
1.
From the File menu, choose Use Template.
If the currently displayed data le is not accompanied by its display settings le,
it is displayed according to the setting information of the template le residing in
the same folder.
If the currently displayed data le is accompanied by its display settings le, it
is displayed according to the setting information of the display settings le.
If you do not wish to use the template, select File > Use Template again to clear
the check mark.
The template file is saved with the name default.tdx in the folder of the currently
displayed data. When using a template file, the template file residing in the same folder
as the displayed data is used. The setting information saved to the template file is as
follows.
• Print comment • The background and grid color
of the waveform display area
• Y-axis zone setting • The width of the zone display
area of each group
• ON/OFF condition of the clipping of the • The active waveform
displayed waveform
• Settings specied in the General Display Settings • The height of the data overview
of each group
• Zoom rate of the time axis • Show/Hide condition of the zone
display area
• Display mode of the time axis (absolute/relative) • Selected group
• Waveform display area • ON/OFF condition of the alarm
display
• Grid type • Position of the display screen
• The channel identication string mode (channel/tag)
• ON/OFF condition of le information items (see section 4.1)