Manualshelf

Owner manual

ManualsBrandsYokogawa ManualsSensorsData Acquisition with PID Control CX2000
12345678910
IM CX2000-S30E
8
3. Procedure
3.1 Message Mode Setting
“MENU” key (Control mode)> setup mode>#9 AUX
- Select message mode from “Common” or “Separate”
Figure 3.1 Message mode setting
3.2 Message Setting
Press the “MENU” key (Control mode) > “MENU” key (Set mode) > #7 “Message” soft
key.
- Select the group No. of the message you want to set, and then specify the desired
group name and enter message contents (up to 16 characters).
Fig. 3.2 Message setting window