Instruction Manual

2-19

IM 04L31A01-17E

Ethernet Interface

Procedure

For the basic flow of operation, see “Setup Procedure Using Operation Keys” on page

ix. For the procedure of entering characters and numbers, see the

user’s manual

IM04L31A01-01E

IM04L31A01-03E

1. Press the MENU key.

The setting mode (control) display appears.

2. Press the FUNC key for approximately 3 s.

The basic setting menu appears.

3. Press the [#7] (Communication) soft key ([#9] (Communication) soft key on the

CX1000).

The communication function setting menu appears.

4. Press the [#3] (Control (Login, Timeout)) soft key ([#5] (Control (Login,

Timeout)) soft key on the CX1000).

Communication setting display appears.

CX 2000 Communication (Control -Login,

Timeout-) setting display

CX 1000 Communication (Login,

Timeout-) setting display

Enabling/Disabling the Login Function of the CX (Use/Not)

5. Use the arrow keys to move the cursor to the [Use/Not] box.

6. Press the [Use] or [Not] soft key.

If you selected [Use] proceed to step 7; if you selected [Not] proceed to step 20.

Registering Users

• Selecting the user level

7. Use the arrow keys to move the cursor to the [Level] box.

8. Press one of the soft keys from [admin] to [user6] to select the user level.

To set the user level to ADMINISTRATOR, select [admin]; To set the user level

to USER, select [user1] to [user6].

2.7 Setting the Login and Timeout Functions of Ethernet Communications