Instruction Manual

7-39
IM 04L31A01-17E
7
Response
7.4 Output Format of Instrument Information
This section describes the instrument information output format of the instrument
information server.
Note
The “ CRLF ” used in this section denotes carriage return line feed.
Response
The parameters of the packet that are returned as a response are lined up according to
the following format.
EA CRLF
(Parameter 1)_=_(value of parameter 1) CRLF
(Parameter 2)_=_(value of parameter 2) CRLF
.....................................
EN
CRLF
• The parameter values are output in the order specified by the command parameter.
• The output order of the parameters when “all” is specified is not constant.
• Even if the same parameters are specified numerous times, only the first
occurrence is output.
• Lower-case characters are used for the parameters.
• “_” indicates a space.
The following table shows the parameter types.
Parameter Output Information
all All information that are output using the parameters (serial, model, host, ip) below
serial Serial number
model Manufacturer, model, and firmware version
host Host name
ip IP address
Output Example
Several output examples are indicated below.
Packet Parameter Sent as Commands Response
The “all” parameter can be used to output all information for parameters serial, model, host, and ip.
all EA
serial = 12V636848
model = YOKOGAWA,CX2000,1.01
host = CX2000-1
ip = 192.168.111.24
EN
Parameters are not case sensitive.
ip HoSt EA
ip = 192.168.111.24
host = CX2000-1
EN
Even if the same parameters are specified numerous times, only the first occurrence is output.
host ip host ip host model EA
host = CX2000-1
ip = 192.168.111.24
model = YOKOGAWA,CX2000,1.01
EN
Undefined parameters will be ignored.
(Space) EA
EN