Instruction Manual

7-12 IM 04L31A01-17E
Program Operatin Mode Output
• The FH command is used to output the data.
• The status of the program operation mode is output. The status is indicated using 32
bits that are divided into 4 groups of 8 bits.
Syntax
EA
CRLF
xxx.xxx.xxx.xxx CRLF
EN CRLF
xxx The statuses of bits 31 to 24, 23 to 16, 15 to 8, and 7 to 0 are indicated
in order in decimal notation.
31 012Bit
The status of each bit indicates the status of the program operation
mode.
Bit 0 status 0: reset, 1: Frun
Bit 1 status 0: Not holding, 1: Holding
Bit 2 status 0: Not waiting, 1: Waiting
Example
When not waiting, not holding, and reset
EA
000.000.000.000
EN
Output of Program Pattern Information Currently in Execution
• The FJ command is used to output the data.
• The information about the program pattern that is currently in execution is output.
Syntax
EA
CRLF
PTNO_x1 CRLF
SEGNO_x2 CRLF
PRE_SEGNO_x3 CRLF
SEGUSE_x4 CRLF
SEGTM_hh:mi:ss CRLF
WAITTM_hh:mi:ss CRLF
RCYMOD_x5 CRLF
ALL_RCY_x6 CRLF
REM_RCY_x7 CRLF
RST_x8 CRLF
REN_x9 CRLF
PTN_START_DATE_yy/mo/dd CRLF
PTN_START_TIME_hh:mi:ss CRLF
PTN_STOP_DATE_yy/mo/dd CRLF
PTN_STOP_TIME_hh:mi:ss CRLF
EN CRLF
7.2 Output Format of ASCII Data