Instruction Manual

ManualsBrandsYokogawa ManualsSensorsData Acquisition with PID Control CX2000

181

182

183

184

185

186

187

188

189

190

6-58 IM 04L31A01-17E

MI Outputs display data and event

data in the internal memory

Syntax MI p1,p2,p3,p4<terminator>

p1: Operation type

DIR Put the data on standby for

communication output and output

data list

GET Output (first time)

NEXT Output (succeeding times). This

parameter is used to output the

remaining data when the first

output operation is not adequate.

RESEND Retransmit the previous output

SIZE Output the data size (capacity)

p2: Output data type

DISPLAY Display data

EVENT Event data

p3: Block number (1 to 16)

p4: Output format (FILE, DATA)

Example Output the data in block number 1 containing

display data using the file output format.

MIGET,DISPLAY,1,FILE

Description • Parameter p2 is valid when p1 is set to DIR,

GET, or SIZE.

• Parameters p3 and p4 are valid when p1 is

set to GET or SIZE.

• This command can be used to output data

over the communication interface (Ethernet or

serial) that was selected with the XO

command.

• This command outputs the data, which have

been put on standby using (p1=) DIR, using

(p1=) GET. Make sure to put the data on

standby using DIR before outputting the data

using GET.

MO Outputs TLOG data, manual

sample data, and report data in

the internal memory

Syntax MO p1,p2,p3<terminator>

p1: Operation type

DIR Put the data on standby for

communication output and

output data list

GET Output (first time)

NEXT Output (succeeding times).

This parameter is used to

output the remaining data when

the first output operation is not

adequate.

RESEND Retransmit the previous output

SIZE Output the data size (capacity)

p2: Output data type

TLOG TLOG data

MANUAL Manual sampled data

REPORT Report

p3: Block number

When p2 is set to TLOG 1 to 16

When p2 is set to MANUAL 1 to 50

When p2 is set to REPORT 1 to 40