Instruction Manual

6-9
IM 04L31A01-17E
Command
6
Command Function Execution mode ADMINISTRATOR USER Page
Name
YO Loads setup data Basic setting mode Yes No 6-46
YC Clears the measured/computed data, Basic setting mode Yes No 6-46
initializes setup data
YT Sets the FTP transfer timing Basic setting mode Yes No 6-46
YG Sets whether to use the Web server function Basic setting mode Yes No 6-46
YL Sets the operation of the Modbus master Basic setting mode Yes No 6-46
function
YM Sets the command of the Modbus master Basic setting mode Yes No 6-46
function
YU Sets the contents to be sent via e-mail Basic setting mode Yes No 6-47
YV Sets the e-mail recipient address Basic setting mode Yes No 6-48
YW Sets the e-mail sender address Basic setting mode Yes No 6-48
YX Sets the e-mail SMTP server name Basic setting mode Yes No 6-48
ML Sets the communication buffer recovery Basic setting mode Yes No 6-48
processing
MM Sets the modbus mouse/temperature meter Basic setting mode Yes No 6-48
communication automatic recovery
Yes: Command usable
No: Command not usable
Basic Setting Commands (Control)
Command Command Function Execution mode ADMINISTRATOR USER Page
Type Name
Control Action, Input Setting
GB Sets the PID group number Basic setting mode Yes No 6-49
GI Sets the control period Basic setting mode Yes No 6-49
HX Sets control action parameters Basic setting mode Yes No 6-49
PY Sets 6/4loop select (CX2000 only) Basic setting mode Yes No 6-49
HQ Turns Off/On auto tuning Basic setting mode Yes No 6-49
PC Sets the control mode Basic setting mode Yes No 6-49
PP Turns Off/On the program control Basic setting mode Yes No 6-49
GM Sets the PID control mode Basic setting mode Yes No 6-49
HB Sets the burn out Basic setting mode Yes No 6-49
MK Sets the burn out Basic setting mode Yes No 6-50
(when PV/SP computation is ON)
HR Sets the RJC Basic setting mode Yes No 6-50
MJ Sets the RJC Basic setting mode Yes No 6-50
(when PV/SP computation is ON)
Contact Input Registration/AUX
GT Registers contact inputs Basic setting mode Yes No 6-50
GS Sets remote input Basic setting mode Yes No 6-51
HG Sets the alarm mode Basic setting mode Yes No 6-51
HY Sets the SP number selection source Basic setting mode Yes No 6-51
MY Turns Off/On PV/SP computation Basic setting mode Yes No 6-51
MZ Sets the CLOG error Basic setting mode Yes No 6-51
Output Processing
GF Sets the output processing Basic setting mode Yes No 6-51
Relay
GR Sets relay parameters Basic setting mode Yes No 6-51
GE Sets relay action Basic setting mode Yes No 6-51
Tuning Setting
GU Turns Off/On the tuning item Basic setting mode Yes No 6-52
6.2 A List of Commands