Instruction Manual

6-8 IM 04L31A01-17E
Basic Setting Commands (Measurement)
• In order to activate the settings that are changed using the basic setting commands,
the settings must be saved using the XE command. Make sure to save the settings
with the XE command before changing from the basic setting mode to the operation
mode. Otherwise, new settings will not be activated.
• The settings that are returned in response to a query in the basic setting mode will
contain the new settings even if they are not saved with the XE command. However,
the new settings will not be activated until they are saved. In order to activate the new
settings, the XE command must be issued as described earlier. If the settings are not
saved or cleared using the XE command and the execution mode is changed from the
basic setting mode to the operation mode, the settings that are returned in the
response to a query will contain the settings that existed before they were changed.
Note
• The settings that are changed using the YA/YK/YN/YQ/YS/YG/YL/YM command are activated
after saving the new settings using the XE command and rebooting the CX.
• When the YO command executed, the communication is disconnected.
Command Function Execution mode ADMINISTRATOR USER Page
Name
XA Sets alarm related settings Basic setting mode Yes No 6-40
XI Sets the A/D integral time Basic setting mode Yes No 6-40
XB Sets the burn out Basic setting mode Yes No 6-40
XJ Sets the RJC Basic setting mode Yes No 6-40
XV Sets the scan interval Basic setting mode Yes No 6-41
XT Selects the temperature unit Basic setting mode Yes No 6-41
XS Sets the channels to display the trend and Basic setting mode Yes No 6-41
acquire the data
XM Sets the conditions used to acquire display/ Basic setting mode Yes No 6-41
event data to the internal memory or save the
data to the external storage medium
XU Sets the channel identification display, Basic setting mode Yes No 6-41
memory alarm time, language, whether or
not to use the partial expanded display
function and the batch function
XR Sets the remote action Basic setting mode Yes No 6-42
XQ Sets the timer Basic setting mode Yes No 6-42
RO Sets the report type and generation time Basic setting mode Yes No 6-42
RM Sets the report channel Basic setting mode Yes No 6-43
XO Selects the communication interface used to Basic setting mode Yes No 6-44
output data residing in the internal memory
(display, event, TLOG, manual sampled, and
report data) and files on the external storage
medium using output commands
(ME/MI/MO commands)
XH Sets whether or not to use the key login, Basic setting mode Yes No 6-44
auto logout, and user ID functions
XE Sets whether or not to store the basic settings Basic setting mode Yes No 6-44
XG Sets the time zone Basic setting mode Yes No 6-44
XP Sets the memory timeup date and time Basic setting mode Yes No 6-44
YA Sets the IP address, subnet mask, and Basic setting mode Yes No 6-45
default gateway
YK Sets keep alive Basic setting mode Yes No 6-45
YN Sets the DNS Basic setting mode Yes No 6-45
YQ Sets the communication timeout Basic setting mode Yes No 6-45
YS Sets the serial interface Basic setting mode Yes No 6-45
6.2 A List of Commands