User guide

3-7
IM WX201-01E
Operation of the Trend Display Window
1
2
3
4
Index
Minimum and Maximum Values of Scale, and the indstart Scale Value
Display Format instop
You can set the maximum and minimum values of the scale when displaying waveforms.
The value in the Scale Min column is the lower end of the Y-axis, and that of the Scale
Max column is the upper end.
In the Form. column, you can specify oating point or exponen
tial format for the scale
values.
Selects exponential display Waveform Display Screen
Setting the Waveform Display Zones
You can set waveform display range for displaying trends. The waveform display
range is set as 0% at the bottom, and 100% at the top. The values in the Zone Min
and Max columns represent the lower (0-9%) and upper (1-100%) ends of the trend
display range.
Waveform Display Screen
Setting Trip Points
You can display a trip line to indicate a particular value of interest (trip point) in the
trend display area. Two trip points (trip 1 is red, trip 2 is blue) can be set for each
waveform. By selecting and clearing the check buttons in the Trip 1 and Trip 2
columns, you can select whether to display the corresponding trip points in the Trend
display screen.
Trip line ON/OFF
Waveform Display Screen
Trip line
Trip 1 value
Trip 2 value
3.3 Settings in the Channel Setup Screens