Owner's manual

2-3
IM WX1-05E
1
2
3
Index
Operating Procedure
2.2 Entering Environment Settings
5.
Enter the IP address or host name and port number. (The default port number for
Modbus/TCP is 502. Use this port number if no particular setting is required by
the instrument.)
Data Acquisition Conditions, Communication Retry
Procedure
1.
Click the Scan Interval tab or choose View > Scan Interval setting from the menu
bar.
2.
Set the scan interval, timeout time, and number of retries.
Logging interval: 0.5–3600 sec.
Timeout time: 1–10 sec.
Retry Use : Select whether or not to retry communications (ON/OFF).
Retry Interval : The interval between communication retries (30–3600 sec.)